Posted by: pavan_609 ® 07/16/2006, 18:35:28 Author Profile eMail author Edit

hi, we have a system for coke dust transfer in our plant, which comprises of 1.Air lock 2.Screw Conveyor 3.Bucket Elevator In this we face a frequent problem of Screw conveyor jamming. Can anyone think of the solution to avoid this without any major modification in the system thanx pavan PAVAN

Replies to this message

Re: design problem
Re: design problem -- pavan_609	Post Reply	Top of thread	Forum

Posted by: vishy_63 ® 08/02/2006, 05:01:22 Author Profile eMail author Edit

hello can u tell me flow discharge of caol through screw conveyor and screw conveyor were it is mounted? if it is on bearings 1. bearings should free from coal dust 2. compare load capacity of bearings to discharge coal weight

Post Reply | Tell a Friend (must be logged in) | Alert Admin About Post

Where am I? Original Top of thread

Re: design problem
Re: design problem -- pavan_609	Post Reply	Top of thread	Forum

Posted by: randykimball ® 07/16/2006, 23:42:40 Author Profile eMail author Edit

Can you express what sort of jam you are getting... at the bearings? IE: caused by chunks of product? caused by metal screw parts rubbing the housing? other? How long, how big of a diamenter, and of what is the screw and housing made of? The worst suggestion of your lifetime may be the catalyst to the grandest idea of the century, never let suggestions go unsaid nor fail to listen to them.

Post Reply | Tell a Friend (must be logged in) | Alert Admin About Post

Where am I? Original Top of thread

| |