|
||||||||||||
|
||||||||||||
| PRESS TONNAGE CALCULATION |  | ||
| Post Reply | Engineering Forum | ||
| Posted by: basavaraj ® 01/12/2009, 15:11:16 Author Profile eMail author Edit |
I AM LOOKING FOR A REFERENCE ON HOW TO CALCULATE THE PRESS TONNAGE REQUIRED TO COIN DIA 22mm STEEL ROD TO THE THICKNESS OF 15mm.LENGTH OF THE DEFORMED PART IS 45mm ( IN THE MIDDLE OF 200mm LONG ROD ).
MATERIAL-SAE 1524, TENSILE = 565MPa MIN, YIELD = 482 MPa MIN. Modified by basavaraj at Mon, Jan 12, 2009, 15:11:47 |
| Post Reply Tell a Friend (must be logged in) Alert Admin About Post |
| | |
© Copyright 2000 - 2024, by Engineers Edge, LLC All rights reserved. Disclaimer
